Release Paper Extrusion Laminating Machine

Home >  Product >  Laminating Extrusion >  Release Paper Extrusion Laminating Machine

All Categorys

Extruder Machines
Pelletizing System
Compounding
Compounding
Sheet Extrusion
Laminating Extrusion
Kneader (Banbury)
Stone Paper Machine
Casting Film Machine

All Small Categorys

Extruder Machines
Pelletizing System
Compounding
Compounding
Sheet Extrusion
Laminating Extrusion
Kneader (Banbury)
Stone Paper Machine
Casting Film Machine

Hot sale release paper laminating machine PE PLA extrusion coating photo paper lamination machine

This machine efficiently applies a layer of PE or PLA onto photo paper, providing protection and enhancing its properties. The extrusion coating process ensures uniform coverage, resulting in high-quality laminated photo paper suitable for various applications such as printing, packaging, and labeling.

  • Description
Inquiry

Is there a problem? Please contact us to serve you!

Inquiry
Hot sale release paper laminating machine PE PLA extrusion coating photo paper lamination machine
Application area
1.paper bags laminating , paper packaging used; release paper, photo paper
2.coated paper laminating
3:release paper, photo paper, paper roll used in packaging field , all can be laminated to make it water proof
Machine Introduction & Configuration
Lamination Extrusion Machine Introduction
The equipment adopts a one-by-one design, the unwinding adopts exchange volume, magnetic powder tension design, constant tension control, and the production acceleration and deceleration speed can be synchronized.Ratio control, edge material crushing online recycling, less production waste, speed can reach 50 -200m/min several design.
The laminating machine uses imported electrical components, the central control unit mainly adopts the German SIEMENS series or better than the above; the human-machine interface selects the German SIEMENS; the temperature control unit adopts the CPU temperature control module; the extruder Siemens Beide's high-performance governor; the line speed can be adjusted between 0 and 50 m/min. The high-performance vector speed controller of Siemens Beide is used for winding. The specific parameter setting can be realized by touch screen
.
Configurations of Lamination Extrusion Line
S/N
Machine Configuration
1
Double station unwinding system
2
Vacuum screw feeder
3
Hopper dryer
4
Single screw extruder
5
Single board single station filter
6
Solution static mixer
7
Laminating Special Mould
8
Laminating composite molding system
9
Online Infrared Detection System
10
Correction device
11
Fabric static elimination device
12
Tractor
13
Double station automatic winding system
14
SIEMENS human-machine interface control system
Main Parts Details
Several Machine Models Meet Different Requests From Different Clients; Support The Customized Design
Laminating Molding Compositing System
Molding cooling capacity and excellent temperature uniformity A film having a small roll unevenness and a uniform thickness can be obtained, since the surface of the roll is molded and precision machined , high speed and high stable operation can be achieved
Oven Heating
Oven Heating method:Electric heating , conducting oil heating ;gas heating ; steam heating , all these can be chosen by customer themselves.
Unwinding Machine unit
Double station automatic non stop splicing system ; bearing weight can reach 4ton or customized ,different base materials adopt different designs
Automatic Winding Unit
Mandrel type:air-expansion shaft type,the air-expansion shaft adopts pneumatic clamping,and the transmission mechanism is fully sealed.
Coil diameter:up to 800 mm Tension control :It is detected by the tension sensor,output by the automatic tension controller,and fully automatic tension control driven by the inverter and the AC vector frequency conversion motor controlled by PLC,with the functions of constant tension setting and taper tension setting
Siemens PLC Control System
This control system uses imported electrical components. The central control unit mainly adopts the German SIEMENS series or better than this; the human-machine interface selects the German SIEMENS; the temperature control unit adopts the CPU temperature control module; the extruder Siemens Beide's high-performance governor; The speed of the film machine is imported and controlled by the field bus. The line speed can be adjusted between 0 and 50 m/min. The high-performance vector speed controller of Siemens Beide is used for winding. The specific parameter setting can be realized by the touch screen
Machine Model Overview& Cooperation Process
                          Single Side PLA LDPE Extrusion Coating Lamination Machine 
Mechanical Specifications
1100-2300mm or custom made
Speed of coating film
100-200m/min
Suitable coating resin film
PE、PP 、EVA 、PLA and so on
Suitable base material
Paper etc
thickness of coating film
0.012-0.1mm
inaccuracy thickness of coating film
≦±5mm
complex cooling roller
Φ350mm、Φ500mm、Φ600mm
screw specification
(L/D)Φ90:33、Φ100:33、Φ110::33:
main unwinding diameter
Φ800-1300mm
diameter of rewinding
Φ800-1300mm
We, Nanjing GS Mach Extrusion Equipment LLC , is a professional manufacturer of the High Speed Co Extrusion Coating and Laminating Machine over more than 10 years . the absorption of foreign advanced technology, is currently a complete advanced models of double-sided laminating process, the equipment used to need a complete production of double coated paper, or multi-layer composite materials such as carton of milk,juice box, beverage box, etc., is an ideal equipment for production of aseptic packaging materials, We supply perfect overseas service. We shall send engineers to overseas for machine installation and commissioning and test production guide, and also training to the workers of the buyer. And we are ready to give technical support anytime.The complete cooperation process is as follows:
Factory Introduction
Nanjing GS Mach Extrusion Equipment Machinery Co., Ltd. We are capable team with perfect technology & strength in manufacturing hot melt adhesive coating laminating machine. Own more than twenty years’ experience in hot melt adhesive coating and lamination.We are leading manufacture for producing Hot melt adhesive coating machine, hot melt adhesive coating lamination machine, TPU/EVA adhesive film casting extrusion machine, TPO/HDPE waterproof coil production line etc with good quality and pretty competitive price

If you have any suggestions, please contact us

Contact Us
×

Get in touch